A steel spur pinion has a module of 2 mm and 24 teeth cut on the 20° full-depth system and is to carry 0.25 kW at 450 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa
A steel spur pinion has a module of 2 mm and 24 teeth cut on the 20° full-depth system and is to carry 0.25 kW at 450 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa
jawaban/ answer
Belum ada Komentar untuk "A steel spur pinion has a module of 2 mm and 24 teeth cut on the 20° full-depth system and is to carry 0.25 kW at 450 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa"
Posting Komentar